Post by myusernamenoblanks on May 13, 2015 11:47:53 GMT -6
I'm installing the controller (for a SunStat Pro II Model 500775).
The instructions under "Removing The Thermostat Front Module" say "Remove the screw cover...Lift the front module away from the power module".
The screw cover & screw are separately packaged; there is no screw cover or screw. But when I "lift the front module.." it is trapped at the other end, perhaps by the pair of plastic dogs (catches) shown in the image. I tried pushing on one (through a hole on the side of the device), but that did not seem to release anything.
I'm afraid I'm going to break the "front module". How do I release the thing?