|
Post by jedtaylor on Jul 18, 2010 15:30:09 GMT -6
I connected the unit and it does not respond. Power is to the unit. Proper resistance readings on the heating wires and the sensor. Unit was built in 2007 and in inventory until I purchased it from HD in March '10. What should I test? No lights are displayed. Tried the GFIC and got no response. This is the second unit from the same HD inventory.
|
|
|
Post by Christopher on Jul 19, 2010 6:53:50 GMT -6
Jed,
The first thing I would do is double-check the wiring. Make sure the hot and neutral coming from your breaking are going to the black and white Line wires, not the black and white Load wires. The heating element itself will go to the black and white Load wires. If it still doesn't work, I would have Home Depot order you a new one, not pull one from existing stock. Who knows what's happened to those over the past three years.
|
|